Materials, proportions, levels, light: how an architect makes a characterful house and its extension speak to one another. The practical choices, the common pitfalls and the rules to know before you start drawing.
An old house has its own logic: a certain wall thickness, a rhythm of windows, a particular way of catching the sun. A successful extension works within that logic rather than contradicting it. Here is how we approach this dialogue between old and new at STARC, from the first survey right through to the threshold of the garden.
Start by reading the house
Before drawing a single volume, we spend time in the house. We look at how it works, not just at how it looks.
- Orientation: where the morning light comes from, where the sun sits late in the day, which rooms stay dark.
- Structure: load bearing walls, floors, the condition of the roof frame, any damp at the base of the walls.
- Character: local brick, blue stone, rubble stone, slate, window surrounds, cornices, the proportions of the openings.
- Relationship to the garden: in an old house, you often reach the garden from the kitchen through a small door, sometimes via an extension added over the years.
With an old house, original plans are rare or inaccurate. So we start from an accurate survey, often using a 3D scanner through BimBot, the survey brand of our partner firm Optibim. Walls that are out of plumb and levels that vary by a few centimetres are known from the outset, rather than discovered on site.
Proportions before materials
It is often assumed that harmony depends on the choice of brick. In reality, it is first and foremost a question of volumes. A poorly proportioned extension remains a mistake, even in the finest material.
A few principles we often apply:
- Stay set back. An extension that sits a little lower than the cornice, or slightly recessed from the facade, lets the original house remain legible.
- Respect the hierarchy. The main volume stays the main volume. The extension should never appear more important than the house.
- Extend the lines. Aligning a lintel, a sill height or a cornice level creates a quiet continuity.
- Plan a joint. A recessed joint, a small glazed link or a slight shift in the plan avoids an awkward meeting between two masonries of different ages.
A case we often encounter in Hesbaye and Walloon Brabant: a long house with an old single storey lean to at the rear, dark and poorly insulated. Rather than stacking a new extension onto the old one, it is often more honest to demolish it and design a single clear volume that picks up the depth and height of the house.
Extend contrast or translate
Once the volumes are set, the question of materials arises. There are three broad approaches, all valid if carried through with conviction.
- Extend: the same brick, the same stone, the same slate. This is the most discreet route, but it demands precision. A new brick that is almost the same tends to stand out more than one that is clearly different.
- Contrast: timber, zinc, large glazed surfaces. The extension reads as a new era. Contrast works when it stays simple and restrained.
- Translate: taking the tone, texture or bond of the old building and reinterpreting it in a contemporary material. For instance, a brick of the same tone laid differently, or timber cladding whose colour echoes the window frames.
The choice also depends on budget and maintenance. Timber needs upkeep. Reclaimed brick costs more to lay. We put these differences on the table from the sketch stage, so that you can decide with full knowledge of the trade offs.
Levels and the threshold to the garden
This is often where the success of an extension is decided. In an old house, the ground floor is frequently raised a few steps above the garden. The extension has to choose between two options.
- Align with the house: you move through the interior on one level, and a few steps or a terrace lead down to the garden.
- Step down to the garden: the extension sits lower, with an interior floor level with the terrace. The level change then becomes a feature: a wide run of steps, a built in bench, a change in ceiling height.
The second option often produces a beautiful living space, taller and more open to the outside. But it requires anticipating drainage, waterproofing at the base of the facade and long term accessibility.
Light as the common thread
A poorly conceived extension often darkens the very house it is meant to enlarge. Central rooms, once lit from the rear facade, end up in the middle of the plan. We address this risk from the start.
- A roof lantern or a glazed strip at the junction between old and new brings light back into the heart of the house.
- Large openings facing the garden, shaded by a roof overhang or a pergola, avoid summer overheating.
- Openings aligned with the existing windows create views right through the house, from the street to the far end of the garden.
Be careful with views towards neighbours. The Belgian Civil Code regulates these openings: windows with transparent glazing, openings in walls, balconies, terraces and similar structures must keep a distance of 1.90 m from the neighbouring property, under article 3.132 of Book 3, in force since 1 September 2021. For an extension along a party wall, this shapes the design directly: a blind wall on the neighbour's side, rooflights, and openings turned towards the garden.
What the regulatory framework changes in the design
In Wallonia, the CoDT (Walloon planning code) provides for exemptions from planning permission for certain minor works, but they are narrow. For extending a dwelling, article R.IV.1-1 only covers a room not intended for habitation, up to 40 m² of footprint, with no upper floor or basement, set at least 2 m back from the party boundary, along with other cumulative conditions. The classification table published by SPW Territoire also states that this list does not apply to properties on the conservation list, listed buildings, or those provisionally subject to listing procedures, except in specific cases. A genuine heated living space therefore generally requires a planning permit and an architect. In Brussels, using an architect is compulsory except for works exempted under the order of 13 November 2008.
On the energy side, the extension will need to meet EPB requirements (PEB in French, the Belgian equivalent of EPC energy performance regulations). According to the Service public de Wallonie, an extension is treated as a new building when it creates a protected volume greater than 800 m³ or doubles the existing protected volume. In that case, all new and equivalent buildings will need to source at least 35% of their annual primary energy consumption from renewable energy, a requirement in force since 1 January 2026. This is not an administrative detail: it affects wall thickness, glazing size and the choice of building services. It is worth knowing before the volume is finalised.
Finally, local rules matter too: the communal planning guide, the municipal development scheme, designated landscape areas. We check these with your local planning department before finalising the project, often at a preliminary meeting.
In practice
- Do not choose the brick before the volumes are fixed.
- Keep a legible joint between old and new.
- Decide early on the relationship with the garden, as it sets the levels.
- Check that the extension does not darken the central rooms.
- Factor in EPB, overlooking rules and local regulations from the sketch stage, not when applying for permission.
Do you own a characterful house and are thinking of extending it? We can come and see it with you, understand its qualities and tell you what is possible, at what cost and through what process. Get in touch with the STARC team in Gembloux to talk it through.
