Flat, well oriented plots are becoming scarce in Wallonia. A sloping plot calls for more study, but used well it delivers split levels, views and light. Here is how the architect turns this constraint into a project.
You have found a well situated plot, but it slopes down, up, or sideways. Before giving up on it, bear in mind that a well read slope often produces more interesting houses than a flat site. This calls for precise work from the sketch stage, and that is where the architect makes the difference.
Fewer flat plots and smaller sites
The market has changed. According to the notaries' barometer published by Fednot, in the first half of 2023 sales of building plots fell by 10% in Belgium compared with the same period in 2022. In Wallonia the drop reached 20.5%. Notaries were already speaking of a scarcity of building land inevitably leading to higher prices.
Plots are also shrinking. The average size of a plot sold in Wallonia in the first half of 2023 was 10.7 ares. In our two working provinces, Namur leads with the largest plots (12.3 ares), followed by Luxembourg (11.5 ares), then Liège and Walloon Brabant (10.5 ares each). These figures date from 2023, so always ask about recent sales in your municipality.
The practical consequence is that attractive flat plots, south facing and well served, sell quickly. What remains are often sites on an embankment, at the bottom of a valley or on a hillside. They can be cheaper to buy. But they will only be a good deal if the house is designed for them.
Reading the slope before drawing
A sloping plot cannot be understood from a listing photo. Before the first sketch, we gather some straightforward information:
- A precise survey of the land. A 10% gradient over a 20 metre depth means a 2 metre difference between front and back, almost a storey. For this survey we work with BimBot, Optibim's 3D laser scanning brand, which gives us a reliable model of the plot and its surroundings.
- The orientation relative to the slope. A plot that slopes down towards the south is a gift. One that slopes down towards the north needs more care to capture light.
- The ground itself. A geotechnical study can reveal constraints such as clay, fill or a water table that would complicate the foundations.
- The path of the water. On a slope, rainwater always comes from somewhere. You need to know where from before placing the house across its path.
- Views and neighbours. What can be seen from the top of the plot, and what neighbours will see of you.
These factors determine the siting of the house. It is the most important decision in the project, and the hardest to correct afterwards.
Split levels and views what the slope makes possible
On a flat plot the house sits at a single level. On a slope it can be staggered. A few arrangements we often use:
- Split levels. The living room a few steps below the kitchen, for instance. This keeps visual continuity while separating uses. Volumes gain height without adding a full storey.
- Entry from above. When the street is higher up, you enter at living room level, with the bedrooms below, quieter and level with the garden.
- A recessed garage or workshop. The semi buried level on the street side takes what does not need natural light: garage, cellar, utility room, plant room.
- A terrace over the lower volume. The roof of the lower level becomes a terrace facing the view, without encroaching on the garden.
- Borrowed light. A high window, a roof light or a glazed walkway brings light through to rooms set against the bank.
Used well, the slope also makes a house sit more discreetly in the landscape. A volume that follows the ground appears lower from the street than a house set on a raised, filled platform.
Earthworks and excavated soil a cost to keep under control
The slope comes at a price. A sloping or damp plot brings additional costs for earthworks and stabilisation. The aim of the design is to limit them: move as little soil as possible and reuse on site whatever is dug out.
On the planning side, the CoDT (the Walloon planning code) requires planning permission for any alteration to the ground considered sensitive. The rules have changed: according to a recent article, the reform of exemptions that came into force on 1 May 2025 tightened the conditions in flood prone areas. Cuts and fills must therefore appear clearly in the permit application, with dimensioned cross sections. It is the architect's job to prepare these and discuss them with the municipality.
On the environmental side, soil leaving the site is regulated. SPW Environnement (the Walloon environment administration) points out that the soil quality report is sent to the non profit body Walterre, and if it is declared compliant, a Soil Quality Control Certificate is issued. This certificate is required if the quantity of soil to be removed exceeds 400 m³ and/or if the plot the soil comes from is marked peach or lavender in the Soil Status Database. Where soil is reused on its site of origin, however, no formalities are needed, apart from a few specific cases. All the more reason to balance cuts and fills from the start of the project.
That leaves the constructional choices, which we make together with the engineering office Optibim for stability and rainwater management:
- Walls retaining earth, which need careful waterproofing and drainage.
- Retaining walls in the garden, often underestimated in the budget.
- Managing surface water flowing towards the house from higher ground.
- Insulation of buried walls, which counts in the PEB (EPB, energy performance of buildings) calculation.
Pitfalls to avoid before signing
A sloping plot should be bought with a little more caution. Before signing the preliminary agreement, check at least these points:
- Ask for a planning certificate. The CU1 confirms the zoning. The CU2 gives an opinion on the feasibility of a specific project, and it is worth obtaining for a difficult plot.
- Read the municipal regulations. Heights are often measured from the natural ground level, and this becomes more complicated on a slope.
- Test the access. A garage ramp that is too steep is uncomfortable day to day and dangerous in winter.
- Look at the plot after rain. Damp areas and run off are then visible to the naked eye.
- Have the earthworks costed before buying. A lower purchase price can be absorbed, or exceeded, by foundations and retaining structures.
A site visit with an architect before buying costs little compared with the risk involved. An hour on site is enough to see whether the siting will be straightforward, tricky or unreasonable.
What if the slope were your best argument
The plots that remain available call for more thought. This is exactly where architectural work comes into its own: turning a change in level into a sequence of spaces, a view into an extra room, and a constraint into a house unlike any other in the neighbouring development.
Are you hesitating over a sloping or irregular plot in Namur province, Walloon Brabant or elsewhere in Wallonia? Contact STARC in Gembloux. We can look at the site with you, before or after purchase, and tell you honestly what it allows.
Frédéric Odent, director of STARC
